Launch X431 Ltd

Proudly Presents

 

CReaderV developed by LAUNCH

UK Offical importers NO. 1 in the UK for all Launch Products

 

 

CReaderV is newly developed by LAUNCH, specially designed for car

owners or DIYs to diagnose any vehicle that is compliant to OBDII/EOBD.

It not only can read/clear DTCs, but also can read live data in 2 modes,

and perform many special tests. Tri-languages make it operation easily

for a technician. The feature of upgrading online ensures it can test new

model cars and/or functions in the future.  

 

 

 

 

Continuous Monitors -- Some of the vehicle components or systems

Are continuously tested by the vehicle’s OBD II system, while others are

Tested only under specific vehicle operating conditions. The continuously

Monitored components listed below are always ready:

1）Misfire

2）Fuel System

3）Comprehensive Components (CCM)

Once the vehicle is running, the OBD II system is continuously checking

the above components, monitoring key engine sensors, watching for

engine misfire, and monitoring fuel demands. 

 

 

 

Non-Continuous Monitors -- Unlike the continuous monitors, many

Emissions and engine system components require the vehicle to be

Operated under specific conditions before the monitor is ready. These

Monitors are termed non-continuous monitors and are listed below:

1) EGR System

2) O2 Sensors

3) Catalyst

4) Evaporative System

5) O2 Sensor Heater

6) Secondary air Injection

7) Heated Catalyst

8) A/C system

 

 

 

Outline of CReaderV

 

 

 

① Cable with OBD II CONNECTOR -- Connects the CReaderV to the

Vehicle’s Data Link Connector (DLC).

② LCD DISPLAY -- Indicates test results.

③ EXIT BUTTON -- Returns to previous menu.

④ UP/DOWN Button’s – Move cursor up or down for selection; or turn

page up or down when more one page displayed

⑤ ENTER BUTTON--Confirms a selection (or action) from a menu list

⑥ USB PORT -- Connects to computer to update the CReaderV online

 

 

Specifications

1) Display: Backlit, 160 x 160 pixels

2) Operating Temperature: 0 to 60°C (32 to 140 F°)

3) Storage Temperature: -20 to 70°C (-4 to 158 F°)

4) Power: 8 to 18 Volts provided via DLC

5) Unit Dimensions: 126 mm×88 mm×22 mm（Length×Width×

Thickness）

6) Test Cable length:0.9m

 

 

 

 

Supported Protocols :

OBDII: ISO9141

SAE J1850VPW

SAE J1850 PWM


EOBD: ISO14230 KPW


CANBUS: ISO15765

 

Accessories Included

1) User’s Manual -- Instructions on tool operations

2)USB cable--Connect to a computer for upgrading online 

Power supply

The power of the CReaderV is provided via the vehicle Data Link

Connector (DLC). Follow the steps below to power it up:

1) Find DLC on vehicle

 

 A plastic DLC cover may be found for some vehicles and you

need to remove it before plugging the OBD2 cable.

2) Plug the connector at the end of OBD II cable to the vehicle’s DLC.

 

"Another Great Product From Launch"

 

 

Contact Us Today

info@x431ltd.co.uk

                       

01709 591384